Sega Transformers Human Alliance - 11-5 Repair and maintenance for LED panel; How to Replace the Push Button Switch When the Start Button Doesnt Work in the Input Test; 12-1 Unscrew and remove the STAR BUTTON PLATE.; 12-2 Remove the micro-switch from the lamp housing.

44
11-5 Repair and maintenance for LED panel
12 HOW TO REPLACE THE PUSH BUTTON SWITCH WHEN THE
START BUTTON DOESN’T WORK IN THE INPUT TEST
12-1 Unscrew and remove the STAR BUTTON PLATE.
12-2 Remove the micro-switch from the lamp housing.
Check Regularly whether the
connector is fixed, and LED in good
condition, please fix it if there is any
problem with them.
Unscrew 8 PCS of M4*12
with 2.5mm hexagonal key
12
󴘉
HOW TO REPLACE THE PUSH BUTTON SWITCH WHEN THE START BUTTON DOESN’T
WORK IN THE INPUT TEST
http://op.sega.jp/op_e/