Sega Transformers Human Alliance - 10-2 GAME TEST MODE

31
IMPORTANT
10-2 GAME TEST MODE
Press test button to enter SYSTEM TEST MODE screen. Press service button, choose
GAME TEST MODE and press test button again to enter GAME TEST MODE screen.
GAME TEST MODE screen
■Control
- Use the SERVICE Button to move the cursor to the desired test item.
- Press the TEST Button to confirm selection of the item.
- Select EXIT and press the TEST Button to return to the SYSTEM TEST MODE screen.
Menu Item
BOOKKEEPING
Displays all recorded game data.
INPUT TEST
Tests each input device used for the game.
OUTPUT TEST
Tests each output device used for the game.
GAME ASSIGNMENTS
Adjusts all game settings.
CONTROLLER CALIBRATION
SETTING
Adjusts aim settings for control units.
BACKUP DATA CLEAR
Erases all types of game records.
The setting will not take effects if the change only applies on setting window in GAME TEST
MODE.
Please apply normal control method and quit setting mode.
Please strictly apply correct setting. Incorrect setting will cause run time error or unpredicted
problem.
10. GAME TEST MODE
http://op.sega.jp/op_e/