Sega Transformers Human Alliance - 19-2 CLEANING THE RINGEDGE2

59
19-2 CLEANING THE RINGEDGE2
Take the RINGEDGE2 off once a year and use a vacuum cleaner to clean the areas around the intake and
exhaust vents and where it is attached to the cabinet.
Refer to Steps "19-1 RINGEDGE2 - LOCATION" to take the RINGEDGE2 off.
Remove the 2 screws and take off the RINGEDGE2 metal filter. The screws are on the
reverse side from the connector side.
Clean around the air vent of the RINGEDGE2 with a vacuum cleaner.
IMPORTANT
 You should clean the RINGEDGE2 once pe r year , or when "Error 0090 " or "Error 0091"
appear. Dust building up within the RINGEDGE 2 creates the risk of faults such as
malfunctions.
 The game boards in the server box and the drive cabinet are different. After cleaning, be
sure to put them back in the correct place.
1
2
3
19. MAINFRAME POSITION
http://op.sega.jp/op_e/