Sega Transformers Human Alliance - 13-3 Maintenance for the control table lamp

47
2 Turn the micro-switch support clockwise
3 Replace lamp bar
Micro-switch supporting stand.
a) Unscrew the screws (red arrow) with cross screw
driver
b) LED_5050.PCB V3.1. Unplug the wire connector and
replace the lamp bar(LED_5050.PCB V3.1).
c) Follow the original order when installing the red
insulating spacer and the colloidal particles to
prevent any break and leakage.
13. MAINTENANCE FOR OTHER COMPONENTS
http://op.sega.jp/op_e/