www.seuservice.com
19
Insert the Billboard into the holder
bracket, fix to PTV with the 2
screws.
Remove the 2 truss screws;
dismount the lower lid form the
Front Cabinet's face side.
TRUSS SCREW (black)
M4 X 25
Connect two wire-connectors inside the Front Cabinet into the PTV connector panel. The
connection angle is fixed. Easy to fix them arranging the angle and the orientation of each
connector. Be sure of the correct connection in order to prevent the damage of the connector or
the terminal portion. There are fixed screws both sides of the Video signal (D-sub) connector.
Fasten them securely.
LOWER LID
PHOTO 6. 1 a
PHOTO 6. 1 b
Connect the Connector.
7
8
9
To Next Page
Loading...
