a load on the winch.
◆ After the winching, release the load
immediately. Do not tighten the cable.
◆ Always stay away from cable, hook and winch.
◆ Check winch, cables, hook, and broken strands of
worn wires regularly. When operating with the
steel wire cable, wear thick leather gloves. Never let
the steel wire cable run through your hands. Check
the steel cable before use. Crushed, pinched, worn or
kinked areas seriously reduce cable working load
limit. Damaged wire cable should be replaced.
◆ The clutch should be disconnected first, and then the
winch cable should be pulled by the hook of the
protective lever.
◆ Always use the hook strap when handling the hook.
◆ After the use, pull the winch cable tightly with about
50 kg of tension, using the hook strap.
◆ Do not operate the winch under the influence of
alcohol or drugs.
◆ If there is a problem, cut off the battery
immediately and check carefully.
To Next Page
Loading...
