traction between the rear wheels, allowing the
turn to be made smoothly. The same leaning
technique should be used for turning in reverse.
5. Practice turns at slow speeds before attempting to
turn at faster speeds.
Riding in reverse
If you need to reverse, make sure the area behind you is
clear, and operate at low speed.
Do not use the Override switch unless additional wheel
speed is required for vehicle movement. Use the Override
button with caution as it greatly increase rearward speed. Do
not operate at wide open throttle. Operate the throttle just
enough to maintain a desired momentum.
To reverse, follow the following procedure：
1. Always check for obstacles or people behind you;
be sure there are no obstacles or people in your way.
2. Press brake pedal and change the gears to "R"；
Turning improperly can result in vehicle overturn. Never
turn abruptly or at sharp angles. Never turn at high
speeds. Never turn quickly when carrying cargo.
To Next Page
Loading...
