Segway Snarler AT6 S - Starting the Engine; Parking; Turns

OPERATION
80
Starting the engine
1. Apply forcefully the foot brake.
2. Turn the ignition key to the“ON”position (P. 38).
3. Press the start button (green) to start the engine;
(P. 39)
4. Allow the engine to warm up.
Parking
1. Apply the foot brake and set the shift lever to the "P"
position;
2. Press the engine stop button (red) to stop the engine;
(P. 39)
3. Turn the key to the "OFF" position (P. 38); the key can
be taken out of the main switch.
4. Lock the Parking brake lever; (P. 53)
Turns
Turning on ATV involves moving your body. You must learn
to lean and shift body weight into turns to maintain control.
1. Slow down.
2. Steer in the direction of the turn.
3. Keep both feet on the footrests.
4. Lean your upper body to the inside of the turn
while supporting your weight on the outer
footrest. This technique alters the balance of