LUBRICATING GUIDE
Check and lubricate all components at the intervals listed in
the periodic maintenance chart. Items not listed in the chart
should be lubricated in the general lubrication interval. The
rocker arm is lubricated at the factory and does not require
additional lubrication. However, if these components are
heavily used, the user may perform additional lubrication as
required.
Maintain level
in safe range
on dipstick
Maintain the
level between
the fill lines.
Maintain the
level between
the fill lines.
Suspension,
stabilizer
bar grease
Grease nipples
(3 pumps max.)
every 800 km
To Next Page
Loading...
