Reinstall new lamp into the new headlight. Installation is
reverse of disassembly. After installation, turn on the
headlights to test whether the lamp is working properly.
Taillight / rear turn light replacement
To change taillight:
Remove rear light cover.
1. Unscrew the rear light holder.
2. Turn the bulb to be replaced counter-clockwise. When
the limit bead at the end of the bulb gets stuck in the
bulb seat slot, damaged bulb can be taken out and
replaced with a new bulb of the same type and rating.
3. Test if the light works normally.
To Next Page
Loading...
