Engine oil level check
1. Park the vehicle on a level ground. Wait at least
5 minutes to allow the oil to flow back to the
bottom of the engine.
2. Put a piece of cotton cloth under the end of the oil
dipstick, then pull the oil dipstick out.
3. Wipe the oil dipstick clean.
4. Reinsert oil dipstick completely;
5. Put a piece of cotton cloth under the end of the oil
dipstick, then pull out the oil dipstick and check the
oil level.
Note:
Oil level should be between the Upper mark
1
and Lower
mark
2
of the dipstick. Oil below the lower mark means the
oil is too low and should be added, oil on the upper level
means there is too much oil in the engine.
Running the engine with an improper oil level can cause
serious engine damage.
To Next Page
Loading...
