FUSES
All circuits on this ATV are protected with fuses to
protect electrical systems from damage by high current
(short-circuit or overload).
If there is any electrical system failure, always check the
fuses first. You can consider electrical faults. If the fuse is
blown, replace it with a fuse of the same type and rating.
There are several spare fuses in the fuse box. Check all other
fuses for possible cause. Replace all blown fuses and check
the electrical system. All fuses are located in the fuse
box. In the event of a system failure, see "Fuse/relay
ratings and location" for details.
◆ Always replace a blown fuse with the fuse of the
same type and rating.
◆ Do not replace the fuse with anything else.
◆ Never use wires instead of the proper fuses - even as
a temporary replacement this is strictly prohibited.
◆ If the fuse immediately blows again, contact your
dealer.
To Next Page
Loading...
