Segway Snarler AT6 S - Tank Cover

MAINTENANCE
119
TANK COVER
1
Tank cover
2
Expansion screws
3
Hexagon screw
1. Remove the seat (see Page 118);
2. Remove the two expansion screws in front of the
tank cover;
3. Remove the two hexagon screws behind the tank
cover;
4. Lift the tank cover up.
NOTE
There are two wire harness connectors at the bottom of
the tank cover. If you need to completely remove tank
cover, pull out the connectors.
3
2
1
2
1
3
1