2. Place the transmission in Park.
3. Turn the engine off.
4. Engage the Parking brake.
5. Slowly release the brake pedal and make sure
the transmission is in Park before exiting the vehicle.
6. Remove the ignition key to prevent unauthorized use.
Break-in
The engine needs 300 km break-in period.
During break-in:
◆ Avoid using full throttle.
◆ Always use less than 3/4 throttle.
◆ Do not pull or carry heavy loads.
◆ Avoid hard or continuous acceleration.
◆ Vary the engine RPM
The brakes need a 200km run-in period.
New brakes will not operate at their maximum efficiency
until the run-in period is over. Brake performance may be
compromised, so be careful.
During this period, avoid full-throttle operation,
rapid acceleration, and riding in constant RPM.
To Next Page
Loading...
