Tightening torque：
1. Stop the engine.
2. Place the transmission in Park ("P" position).
3. Lock the Parking brake.
4. Loosen the wheel nuts slightly.
5. Lift the side of the vehicle by placing a suitable jack
or stand under the foot rest frame.
6. Loosen and remove 4 wheel nuts.
7. Remove the wheel.
CAUTION
Loose nut may cause wheel to come off during
ride, which may cause an accident or rollover. Always
ensure that all nuts are tightened to 70-80 Nm. Do not
use lubricating oil or grease on wheel bolts / nuts.
Lubricating oil / grease may cause excessive tightening
of wheel nuts, resulting in damage to bolts or wheels. In
addition, lubricating oil or grease can cause wheel nuts
to become loose and wheels may come off, which can
lead to accidents and serious injuries. Clean all
lubricating oil or grease from wheel bolts / wheel nuts.
To Next Page
Loading...
