2 x 4 Mode
When the drive select switch is in 2x4 mode, vehicle is
driven by the rear wheels only. The LCD gauge shows
" " symbol. Select this mode for riding on flat, dry, hard
surfaces, and on the road.
4 x 4 Mode
When the 4-wheel mode is selected on the Drive Select
Switch, power is supplied to the rear wheels and to the front
wheels. " " symbol is displayed on the LCD gauge. The
vehicle will limit maximum speed to 30 km/h. This mode is
suitable for rough terrain, muddy or hilly conditions and
other difficult conditions.
4×4 Lock Mode
When you select Locked 4-wheel drive mode on Drive
Select Switch, the four-wheel drive lock symbol " " is
displayed on the LCD gauge. Power is supplied to the rear
and front wheels and the front differential is locked. Left
and right front wheels turn at the same speed. Speed is
limited 30 km/h. This mode is suitable if you get into
troubles.
To Next Page
Loading...
