Segway x2 SE - Segway PT Mats Service

2–1
Segway Personal Transporter SE Service Manual
2 Mats
This chapter describes removal, inspection, and installation of Mats on a
Segway PT.
Your Segway PT comes with two Mats installed to the right and left of the
console. Mats are a functional component of the Rider Detect feature; Mats
permit a wide range of foot positions to achieve rider detection. These
Mats protect the rider detect sensors located beneath them and provide a
comfortable surface on which to stand. Mats should be secured in place prior to
riding.
WARNING!
• Failure to follow these safety precautions could lead to electrical shock,
serious injury, death, or damage to property.
• Read all instructions.
• Power off the Segway PT.
• Unplug the Segway PT.
• Always ensure that the top of the Powerbase and bottom of the Mat
are clean, dry, and free of debris. These Mats protect the rider detect
sensors located beneath them. Mats should be secured in place prior
to riding. Failure to follow these instructions could interfere with the
operation of the Segway PT leading to serious injury, death, or damage
to property.
When to Replace
It is appropriate to replace a Mat if any worn edges or tears are observed.
Applies to Models
i2 SE, x2 SE, x2 SE Turf
Qualications
Customer Replaceable
Customer Replaceable Kits
Standard Mat Kit (23874-00001)
1 Standard Mat
Comfort Mat Kit (23875-00001)
2 Comfort Mats