Seko SAM 5-ME - Machine Controls Listing and Functions

13
4.2.1 Machine controls
Before starting work with your new machine read that
which is written in the following pages and put it into
practice.
Machine controls are (see Fig. 13) :
1. Display control (ADX);
2. Main line light;
3. Emergency light;
4. El. Wiring protection light;
5. Starter light;
6. Forward direction start up light;
7. Right side discharging door closed push button;
8. Stop push button of direction movement;
9. Push button for forward direction start up;
10. Push button for right side discharge door open;
11. Push button for right side conveyor lowering;
12. Push button for right side conveyor lifting;
13. Stop push button left side conveyor rotation;
14. Push button for left side conveyor lowering;
15. Push button for left side conveyor lifting;
16. Main switch lever;
17. Local control light;
18. Remote control light;
19. Bypass starter light;
20. Switch for local and remote control;
21. Timer;
22. Reverse rotation light;
23. Push button for closed left side discharge door;
24. Push button for reverse rotation;
25. Push button for open left side discharge door;
26. Stop push button for right side conveyor rotation;
27. Push button for right side conveyor direct rotation;
28. Push button for right side conveyor reverse rotation;
29. Push button for left side conveyor direct rotation;
30. Push button for left side conveyor reverse rotation;
31. Emergency push button;