97
5. Measuring Light Sources [Measurement Screen]
CAUTION
sync cord is connected to the Sync Terminal or when operating the Power
Button
. Because there is the possibility of burns or negative effects on
vision, please handle with care.
burns.)
temporarily affect vision.)
burns or negative effects on vision, please handle with care.
trigger. In this care, use "5-3 Measurement in Cordless Flash Mode". ( P89)
proper synchronization range of your camera.
enough, or if the color temperature is out of the measurement range, when the Measuring
Button is pressed.
In this case, adjust the brightness or color temperature of light source, or switch the light
range. (
)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
