4
2. Before Use
2-2 Installing the Batteries
1.
Prepare two AA batteries.
2.
in the direction of the arrow and
.
3.
Insert the batteries according to the "+" and "-" symbols in the
Battery Compartment
.
* As shown in the diagram below, please note both positive sides of the batteries are
facing in the same direction.
4.
, press the
WARNING
heat to, or recharge them (except rechargeable batteries). They may burst and
CAUTION
Use the manganese or alkaline batteries.
Also, do not mix old and new batteries.
lf the meter will not be used for an extended period of time,
by battery leaking.
TabsBattery Cover Latch Battery Cover
Battery Compartment
To Next Page
Loading...
