7
2. Before Use
is not set to the dark
Selection Ring for dark calibration." is displayed. Set the
to the dark calibration position
( ) to calibrate the system.
If dark calibration is not successful, "Dark calibration
to the dark
calibration position
( ) to calibrate the system.
6.
Press the Measuring Button to measure.
Turn the Light Selection Ring to select the range.
When measuring ambient light, make sure to select Range L
( ).
( ) or Range H ( )
P100, P102)
When the Measuring Button is pressed at the dark calibration
to the correct position and the Measuring screen will be displayed.
Dark Calibration Position
Dark Calibration
To Next Page
Loading...
Need help?
General
Weight and Dimensions
