Content of the Kit
Important Safety Advice
1. Knowledge of relevant electro-technical regulations is required.
2. Training in use and maintenance of safety equipments is necessary.
3. Professional assistance is required when some mechanism adjustment is needed.
4. Always lay mains and control cables separately.
5. Test every equipment before initial operation.
6. Make familiar with the use of the system before initial operation.
3
Remote control Warning light Baery wire
x2
Control box Wire conduit
(PG11)
Connection Diagram
x2
Gate side brackets
Pillar side brackets
x2
x2
x2
Fixing bolts
Snap pins
Actuator
x2
Warning light
Control box
Photocells Photocells
Actuator Actuator
To Next Page
Loading...