23
GB
Safety instructions
1. Safety instructions
• Risk of injury through an electric shock.
• Terminal connections to a 230 V network must be made
by an authorised electrician.
• Before starting the mounting de-energize the pluggable
cable.
• Ensure that the device cannot be accidentally switched
on.
• The provisions of the local public utilities and stipulations
for wet and damp rooms in accordance with VDE 100 must
be observed when the system is connected.
• Use in dry rooms only.
• For use with unmodified original SELVE parts only.
• Keep persons away from the systems operating range.
• Keep children away from controls.
• Always observe country-specific regulations.
• Do not use defective or damaged devices.
• Do not open the housing of the device. The opening of the
device bears the risk of an electric shock.
• Technical data of the device need to be observed.
• Do not connect any devices which unattended switching
on may result in a fire or damage.
• If the system is controlled by one or more devices, the
system operating range must be visible during opera tion.
• Only cables with sufficient electric strength may be used
to connect control cables (protective low voltages).
Warning!
Warning!
To Next Page
Loading...
