41
GB
General declaration of conformity
9. General declaration of conformity
SELVE GmbH & CO. KG company, hereby declares that the commeo
Control is in conformity with the basic requirements and other rele-
vant provisions of the Directive 2014/53/EU. The declaration of con-
formity can be looked up at www.selve.de.
10. Troubleshooting
Problem Cause Solution
Motor does not work Electric connection defective Check the connection
Motor moves in the wrong
direction
Electric connection defective Exchange ▲ and ▼ wires in
the power supply unit
The commeo Control does
not execute the local com-
mands via the buttons or
rather the extensions
Emergency signal is active Await emergency signal or
eliminate
Runtime not set Reset the runtime
The commeo Control does
not execute the group com-
mands of the extensions
Emergency signal is active Await emergency signal or
eliminate
Runtime not set Reset the runtime
The commeo Control is set to
manual mode
Set the commeo Control into
the automatic mode
The commeo Control does
not execute automatic radio
commands
Transmitter is not pro-
grammed
Programme transmitter
Emergency signal is active Await emergency signal or
eliminate
11. SELVE Service Hotline
• Hotline: Phone +49 2351 925-299
• Download the operating manuals
at www.selve.de or QR scan
To Next Page
Loading...