34
GB
GB
Explanation of functions/terms used
5.1. Intermediate position 1
The intermediate position 1 is a free settable position which can be
called up via a double tap on the DOWN button.
Note: For a correct moving to the intermediate position 1 the runtime
of the construction must be set correctly!
Set intermediate position 1
Operation Drive
Move the drive to the upper end position
with the UP button.
>3 s
Push the STOP button and then addition-
ally push the DOWN button.
Keep both pushed. After 3 seconds, the
programming run starts. Set the position
with the DOWN and UP buttons while
keeping the STOP button pushed.
Releasing the STOP button will save the
position.
To Next Page
Loading...
