EasyManua.ls Logo

Selve SEL Plus - Safety instructions

Selve SEL Plus
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
GB
Safety instructions
1. Safety instructions
This drive must only be connected by authorised specialists. For installation and
maintenance the system has to be de-ernergised.
• Consider the following:
• Relevant laws, standards and instructions
• Country-specific terms
The specifications of the local energy providers and stipulations for damp rooms
pursuant to VDE 0100
The safety instructions of DIN EN 60335
The state of the technology at the time of installation
This instruction manual and any operating instructions for connected com ponents
For the drive installation, a mains supply circuit break with at least 3 mm contact
opening width per pole must be provided (DIN EN 60335). Safety measures against
inadvertent activation must be in place.
Check the drive and the complete installation for damage. In case of damage to the
drive, in particular to the connection line, it must not be taken into operation!
Keep children and non-authorized persons away from the installation. Also keep
objects from the operating area. It must be possible to see the operation area during
working process.
Control units must be installed at a height of more than 1.50 m. Movable parts of the
drive must be installed at a height of more than 2.50 m above the ground or another
surface that grants access to the drive. The minimum distance between moving parts
and adjacent objects is 40 cm.
Outdoor or flush mounted, the motor connecting cable must be laid in a conduit.
Nominal torque and duration of activation must be aligned with the system require-
ments. Technical data such as nominal torque and duration of activation are written
on the identification plate.
This instruction manual is part of the device and warranty conditions. It has to be
handed out to the electrician and operator.
Damage due to wrong handling, wrong wiring, use of force, interference with the drive
by a third party or subsequent changes to the installation and any consequential
damage arising from this is not subject to the warranty.
Use only unchanged SELVE original parts and accessories.
Warning!

Table of Contents

Related product manuals