Sena SNOWTALK User Manual

SNOWTALK
10
5. PAIRING THE SNOWTALK WITH BLUETOOTH
DEVICES
"EFOREUSINGTHEHEADSETWITHANYOF"LUETOOTHDEVICESFORTHElRSTTIME
you need to pair them together. The Snowtalk can pair with Bluetooth
mobile phones, Bluetooth stereo devices such as MP3, and with other
Sena Bluetooth headsets. This pairing operation is required only once for
each Bluetooth device. The headset will remain paired with the devices
and automatically reconnect to them when they are within range. You
will hear a high tone single beep and a voice prompt when the headset
RECONNECTSTOTHEPAIREDDEVICE“Phone connected” to a mobile phone,
“Media connected” to a Bluetooth stereo device.
5.1 Mobile Phone Pairing
1. Turn on the headset and press the (R) Button for 5 seconds until you
hear multiple beeps. You will hear a voice prompt saying “Phone
pairing”.
2. Search for Bluetooth devices on your mobile phone. Select the
headset in the list of the devices detected on the mobile phone.
3. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN.
 4HEMOBILEPHONECONlRMSTHATPAIRINGHASBEENCOMPLETEDANDTHE
headset is ready to use. You will hear a voice prompt from the headset
saying “Your headset is paired”.
5. If the pairing process is not completed within three minutes, the
headset will return to stand-by mode.
5.2 Second Mobile Phone Pairing
Typical Bluetooth headsets can connect with only one HFP (Hands-Free
0ROlLEDEVICEBUTSECONDMOBILEPHONEPAIRINGALLOWSTHEHEADSETTO
connect with two HFP devices at the same time.
1. To pair another mobile phone, press the (R) Button for 5 seconds until
you hear multiple beeps and hear a voice prompt saying “Phone
pairing”.
2. Within 2 seconds, tap the (R) Button. You will hear a voice prompt
saying “Second mobile phone pairing”.
3. Search for Bluetooth devices on your mobile phone. Select the
headset in the list of the devices detected on the mobile phone.
4. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN.
 4HEMOBILEPHONECONlRMSTHATPAIRINGHASBEENCOMPLETEDANDTHE
headset is ready to use. You will hear a voice prompt from the headset
saying “Your headset is paired”.

Sena SNOWTALK Specifications

General

Brand	Sena
Model	SNOWTALK
Category	Telephone Accessories
Language	English