Sena SNOWTALK User Manual

SNOWTALK
23
English
13. FAULT RESET
When the Snowtalk is not working properly or is in faulty status for any
reason, you may reset by pushing the pin-hole reset button at the back
of the right speaker. Insert a paper clip into the reset pin-hole and press
the reset button for a second with light pressure. The Snowtalk will be
switched off, and you have to turn the system back on and try again.
However, this will not restore the headset to factory default settings.
Reset Button
14. FIRMWARE UPGRADE
4HE$EVICE-ANAGERALLOWSYOUTOUPGRADETHElRMWAREANDCONlGURE
the device settings directly from your PC. It is available to download for
both Windows and Mac. For more information on downloading the Device
Manager, please visit www.sena.com.

Sena SNOWTALK Specifications

General

Brand	Sena
Model	SNOWTALK
Category	Telephone Accessories
Language	English