SNOWTALK
18
10. FOUR-WAY CONFERENCE INTERCOM
10.1 Start Four-way Intercom
You can have four-way conference intercom with three other Snowtalk
users by adding one more intercom participant to the three-way intercom.
While you are having three-way intercom as above in section 14.1, a new
participant (D), who is an intercom friend of your intercom friend (C), may
join the conference intercom by making an intercom call to your intercom
friend (C). Please note that in this case, the new participant (D) is an
intercom friend of (C), not of you (A).
You
(A)
Second Friend
(C)
First Friend
(B)
New Participant
(D)
= Intercom Friend of (C)
10.2 End Four-way Intercom
As same in the case of three-way intercom, you can completely get out
of the four-way conference intercom or just disconnect a single intercom
connection.
1. Press the (L) Button for 1 second until you hear a beep to terminate
four-way conference intercom. It terminates the intercom connections
between you (A), and your intercom friends (B) and (C).
2. Tap or double tap the (L) Button to disconnect the intercom connection
with one of the two intercom friends accordingly. However, when you
disconnect the second friend (C) by double tapping the (L) Button,
you will be disconnected with the third participant (D) as well. This is
because the third participant (D) is connected with you via the second
friend (C).
(L) Button Operation Result
Press for 1” Disconnect (B), (C) & (D)
Single tap Disconnect (B)
Double tap Disconnect (C) & (D)
End Four-way Intercom
To Next Page
Loading...
Need help?
General