Sena SNOWTALK - Page 12

SNOWTALK
12
4. You can make other pairings between the headset A and C, and
between the headset A and D by following the same procedure as
above.
B D
A
C
Pairing A & C
B D
A
C
Pairing A & D
5. The intercom pairing queue is ‘Last-Come, First-Served’. If a headset
has multiple paired headsets for intercom conversations, the last
paired headset is set as ſTUVKPVGTEQOHTKGPF. The previous intercom
friend becomes UGEQPFKPVGTEQOHTKGPF, and VJKTFKPVGTEQOHTKGPF.
For example, after the pairing procedures listed above, headset D
is the ſTUVKPVGTEQOHTKGPF of headset A. Headset C is the UGEQPF
KPVGTEQOHTKGPF of headset A, and headset B is the VJKTFKPVGTEQO
HTKGPF of headset A.
Note:
1. The Snowtalk can be paired with all other Sena headset models such as the
SMH10 and the EXPAND for intercom conversation. Please follow the same
procedure as above to pair with these headset models.
2. The SMH5 cannot participate in three-way or four-way conference intercom
with the Snowtalk. The SMH5 has a limited capability of having two-way
intercom.