9. APPENDIX 2
A2.1 ERROR MESSAGES
1. FAIL - Flashing, battery backup of memory has
failed (see section
2.5).
2. Er 1.0 - Different password entered second time
(see section 2.12).
3. POOR - A lacquer fault has been detected
accompanied by fault
indicator illuminating (see section 4.8)
4. BUSY - The SI9500 is waiting for the printer (see
section 6.7)
5. BUFFER NEARLY FULL - Scrolling, computer buffer is 90% full (see
section 7.7)
6. FULL - Flashing, computer buffer is full (see
section 7.7)
7. OL - An internal overload has occurred, remove
probe from
sample to clear.
8. VOID - A valid reading is not being obtained from
the sample (see
section 3.5 or 4.8).
To Next Page
Loading...
