Sennheiser AMBEO - Page 30

Press AMBE
O
Please step
t
Calibration s
Calibration
Processing
Done!
Welcome
Press AMBE
O
1x
1x
Press
AMBEO
Press AMBEO to finalize
Please step to the side
Calibration starts in 10 / 9 / ..
Press AMBEO to start callibration
Press
AMBEO
4
OR
5
6
Putting the AMBEO Soundbar into operation
30 | AMBEO Soundbar
Error messages during room calibration
Message on the display Possible error Possible solution
Calibration failed. Please
p
ress AMBEO to cancel.
Subwoofer volume is too
low
Increase the volume of the subwoofer
and restart the calibration
Microphone is not
connected
Connect the microphone
Ambient noise is too high
Reduce ambient noise
Too few sound reflecting
surfaces in room
Change position of the microphone
within the room
General error An error has occured, restart the
calibration
Canceling the calibration
To cancel the calibration:
Press the volume buttons – (volume down) and + (volume up) for 4
se
conds.
4s
Hold