Sennheiser EM 3532-U - Menu Structure and Overview

50
10 Menus / Overview
FREQUENCY
indicates the current receiving frequency.
( chapter 12)
CHANNEL
indicates the currently assigned channel number.
( chapter 14)
SQUELCH
indicates the squelch threshold.
( chapter 15)
SCAN
scans for available RF signals, the receiving frequency
found is shown on the display.
( chapter 17)
BOOSTER FEED
indicates whether the supply voltage for active
antennæ or antenna boosters is switched on or
off. ( chapter 18)
STANDBY
indicates whether the receiver is set to stand-by
operation. All menus – except for “REMOTE” and
“STANDBY” – are then locked. ( chapter 19).
REMOTE
indicates whether the receiver is set for “computer
remote control only”. ( chapter 20).