58
17 Automatic transmitter search tuning – Scan function
The EM 3532 receiver features a scan function to scan the frequency range of the tuner for a
transmitter.
For some countries, this menu is locked via a special configuration program, since not all tunable
receiving frequencies are approved in these countries. If the “
SCAN” menu is selected, “Loc” appears
on the display.
씰 Press the / buttons to select the “SCAN” menu. “SCAn” appears on the display:
Then press the SET button. The current receiving frequency set appears on the display,
and the “
FREQUENCY MHZ” display as well as the LC dot on the left of the text SCAN begin
to flash.
씰 With the / buttons you can now start the transmitter search tuning either upwards or
downwards. During transmitter search tuning, the display indicates:
or:
To Next Page
Loading...
