Sennheiser Evolution Wireless G4 - Connecting Antennas

Installing the EM 300-500 G4
29
Connecting antennas
To connect the supplied rod antennas:
▷ Connect the first rod antenna to the ANT I socket on the rear side of the
EM 300-500 G4.
▷ Connect the second rod antenna to the ANT II socket on the rear side
of the EM 300-500 G4.
▷ Gently angle the rod antennas to the left and right as shown in the fig-
ure.
If you are using more than one receiver, we recommend using remote
antennas and, as needed, Sennheiser antenna accessories. For more
information, visit the ew G4 product page at www.sennheiser.com.