Sequential PRO 3 - Page 121

109
Pro 3 User’s Guide
Creating Synth Brass
4. Set amplier envelope attack to 66, decay to 62, sustain to 124, and
release to 80.
5. Play some chords. You’ve now got a good basic string pad.
Adding Effects to the String Pad
You can enhance the string pad adding an effect such as chorus and phas-
ing for a retro feel.
To add effects to the string pad:
1. In the effects section, press the effect 1 button.
2. Turn the effect type knob and choose chorus.
3. Set mix to 62, then set parameter 1 (depth) to 131, parameter 2 (rate) to
40, and parameter 3 (lpf cutoff) to 127.
4. Play some chords. Classic string machine! For a retro 70’s era string
synth, let’s add the phaser.
5. Press press the effect 2 button.
6. Turn the effect type knob and choose phaser.
7. Set mix to 64, then set parameter 1 (depth) to 179, parameter 2 (rate) to
15, and parameter 3 (feedback) to 255.
8. Play some chords. Retro string machine! For even more dramatic phas-
ing, set mix to 127.