135
Pro 3 User’s Guide
Appendix F: MIDI Implementation
MIDI Param Receive: Off, CC, NRPN—Sets the method by which parameter
changes are received via MIDI. As with transmission, NRPNs are the preferred
method.
MIDI Control Enable: Off, On—When set to On, the synth will respond
to MIDI controllers, including pitch wheel, mod wheel, pedal, and
volume.
MIDI Prog Send: Off, On—When set to On, the synth will send MIDI
Program Change messages.
MIDI Prog Receive: Off, On—When set to On, the synth will respond to
MIDI Program Change messages.
MIDI SysEx Cable: MIDI, USB—When set to MIDI it will receive and
transmit MIDI SysEx messages using the MIDI ports/cables When set to
USB it will receive and transmit MIDI SysEx messages using the USB
port/cable. MIDI SysEx messages are used when sending and receiving a
variety of data including, programs, alternative tunings, system updates,
and more.
MIDI Out Select: Off, MIDI 1, MIDI 2, USB, MIDI ALL, All—Sets the port
by which MIDI data will be transmitted.
To Next Page
Loading...
