Normal
Use
Once
you
have
created a
few Scale programs
(and PRESET has
been
switched
on
in
Scale
Mode at
least once),
you can easily
manipulate Patch and Scale
programs
as
follows:
17.
In
Patch
Mode,
select the "sound"
program.
Without lifting
your finger
from
its
PROGRAM
SELECT,
hit TUNE
to
switch to Scale
Mode.
18.
In
Scale
Mode,
select Scale program.
Without lifting finger
from its
PROGRAM
SELECT,
hit TUNE to
return
to Patch Mode.
Moving Scale
Programs Between Program Files
Since
it is not
possible
to change
Program
Files in Scale
Mode, the
procedure
for
transferring Scale Programs between files
is somewhat involved,
but
nevertheless
can
be
useful:
19. In Patch
Mode,
select the Program File
containg
the Scale
program
to be
moved.
20.
Switch
to Scale Mode, and select
the Scale program
(with PRESET
on).
21. Switch back
to
Patch
Mode.
22.
Select the destination Program
File.
23.
Switch
back
to Scale Mode.
2^^.
Switch
RECORD on.
25.
Select desired
BANK and PROGRAM
destination for
the
Scale
program.
26.
Verify
that
the Scale program is recorded
as you
intended.
5-6
'
CMIOOOD
2/82
To Next Page
Loading...
