Serpent 750 EVO - Gearbox Assembly

16
gEaRbOX aSSEmbly
STEp 25
Note the correct
gearbox assembly
1- The M2.5x10 screws
adjust the SHIFT POINT.
As default adjustment
screw them untill the screws will
be be leveled with the hole as in
the right pictures.
2- Adjust the M4x4 screw to
minimise the gap between
the shoes and the bell, but still
spinning free without touching.
Check after each run.
25.1 25.2
1
2
3
M4x4
4x4
M4x4
M2.5x10
M2.5x10
2.5x10
M3x6
Note the correct default
M2.5x10 screws adjusting
point.
2.5x10
M4x4
4x4
M2.5x10
M3x6