Setra Systems SRCM User Manual

30
• Select Conguration Write to transfer the master SRCM conguration from the
unit to the thumb drive.
• Select START to initiate the copy operation.
Remove the thumb drive and cable and move to the rst “slave” unit to be cong-
ured. With power applied to that unit, connect the thumb drive and cable. Select
Conguration Read and START to write the master conguration to the new slave
unit.
A Write Process Successful message will appear if the conguration has been
written to memory. Review the various Menu screens of the slave unit and sub-
sequent units to conrm the proper conguration is stored. In most cases the only
change that will be required to clone SRCM units is Primary and Secondary Room
labels that match the location of installation.
USB Conguration
Cloning
USB Port

Setra Systems SRCM Specifications

General

Brand	Setra Systems
Model	SRCM
Category	Touchscreen
Language	English