Setra Systems SRCM User Manual

5
The default screen now has 2 possible modes. If the user wants to display other room
variables in addition to Pressure they can switch to the alternate home screen that shows
up to 4 parameters per room. These Parameters can be Pressure, Temperature, Humidity,
and user-dened (ex: CO
2
). The User switches modes by selecting slider on/slider off on
the bottom of the administrative menu.
The Home screen is the normal continuous operating mode of the SRCM. The Home
screen shows a Condition Banner on the left one-third of the screen, and Operating Con-
ditions on the right two-thirds of the screen. There are two possible home screens, one
with a pressure only display with a slider bar representing the room pressure with respect
to the alarm setpoints. The alternate home screen can be used when there are multiple
parameters being measured in addition to pressure, such as temperature, humidity and a
user-dened option.
Pressure Value
Slider Bar and Setpoint Values
Condition Banner
Room Label
Pressure Mode
• Positive
• Negative
• Neutral (span)
• Standby
Operation
• Normal (green)
• Warning (yellow)
• Door (yellow)
• Alarm (red)
Alternate Home Screen displaying multiple
parameters, in addition to pressure.
Home Screen
Room Label
Pressure Mode
• Positive
• Negative
• Neutral (span)
• Standby
Operation
• Normal (green)
• Warning (yellow)
• Door (yellow)
• Alarm (red)
Pressure
Temperature
Humidity
User-dened
Condition Banner
Home Screen

Setra Systems SRCM Specifications

General

Brand	Setra Systems
Model	SRCM
Category	Touchscreen
Language	English