4
External braking resistors
Mechanical installation
Addendum to the Operating Instructions – MOVIPRO
®
– Accessories
30
4.2.3 Mounting
Required materials
• A mounting plate, for example, to observe the required minimum distances and
clearances
• Suitable mounting and safety elements
Procedure
You can mount the braking resistors directly over the retaining plates.
Proceed as follows:
1. For the bore dimensions, refer to the dimension drawings in the "Technical
data"(→233) chapter.
2. Drill the holes in the appropriate places.
The following figures show how to mount the braking resistors:
Size 0
2110859403
23106913/EN – 02/2018
To Next Page
Loading...
