SEW-Eurodrive PZM2xA-A075-D02-00 - Nameplate; Interface Box Assignment

2
Interface box
Nameplate
Addendum to the Operating Instructions – MOVIPRO
®
– Accessories
8
2.3 Nameplate
The nameplate lists information about the device type of the interface box. The follow-
ing figure shows an example of a nameplate:
D-76646 Bruchsal
Made in Germany
MOVIPRO
Type:
SO#:
Eingang / Input
PZM2xA-A075-D02-00
Ausgang / Output
U =
I =
3 x 380...500 V ± 10%
T =
f =
16 A
50...60 Hz ± 5%
+5...+40 °C IP 54
7.5 kW P =
XX.XXXXXXXXXX.XXXX.XX
[2]
[1]
Schaltmodul
36028799100749579
[1] Product name
[2] CE marking
Depending on the design, the following information is listed on the nameplate:
Value Specification
Type Type designation
SO# Production number
U Voltage
I Maximum current carrying capacity
f Frequency
T Ambient temperature
IP Degree of protection
P Maximum switching capacity
2.4 Interface box assignment
The following table shows the assignment of the interface boxes to the different
MOVIPRO
®
device powers:
Interface box Part number 2.2kW 4kW 7.5kW 11kW 15kW 22kW
PZM2xA-A075-D02-00 18250149 • • •
PZM2xA-A150-D03-00 18250157 • • • • •
PZM2xA-A220-D04-00 28218264 • • • • • •
PZM2xA-A022-M13-00 18250238 •
PZM2xA-A040-M14-00 18250165 •
PZM2xA-A075-M16-00 18250173 •
23106913/EN – 02/2018