SEW-Eurodrive PZM2xA-A075-D02-00 - Technical Data

2
Interface box
Technical data
Addendum to the Operating Instructions – MOVIPRO
®
– Accessories
18
2.9 Technical data
2.9.1 Basic device
Interface box
Description PZM2xA-
A022-
M13-00
PZM2xA-
A040-
M14-00
PZM2xA-
A075-
M16-00
PZM2xA-
A075-
D02-00
PZM2xA-
A150-
D03-00
PZM2xA-
A220-
D04-00
2.2kW 4kW 7.5kW 7.5kW 15kW 22kW
with line and device protection with disconnection switch
Ambient temperature +5–+40°C
(non-condensing, no moisture condensation)
Derating
Ambient temperature ϑ
amb
P
N
reduction: 3% I
N
per K
Up to a max. of 60°C
Climate class EN60721-3-3, class 3K3
Storage temperature ϑ
L
-25–+70°C
Degree of protection IP20, IP54 (in assembled state)
Mass 2.5kg
Dimensions W × H × D 139mm × 116mm × 341mm
Device output to MOVIPRO
®
Nominal current 5A 9A 15A 16A 32A 42A
Integrated device protection 5A 9A 15A – – –
Maximum switching capacity
(IEC, AC3)
2.2kW 4kW 7.5kW 7.5kW 15kW 22kW
Device input
Line voltage V
line
3AC380V–500V
Line frequency f
line
50–60Hz ±5%
Terminal cross section
power supply
2.5mm
2
–10mm
2
(flexible with conductor end sleeve)
24V terminal cross section 1.5mm
2
– 6mm
2
(flexible with conductor end sleeve)
Maximum permitted
back-up fuse
(gL characteristics)
>60A 35A
1)
50A
1)
1) For UL-compliant installation, also observe the maximum permitted fuse for the connected MOVIPRO®. Always adhere to the smal-
ler value.
23106913/EN – 02/2018