SEW-Eurodrive PZM2xA-A075-D02-00 - Electrical Installation

2
Interface box
Electrical installation
Addendum to the Operating Instructions – MOVIPRO
®
– Accessories
12
2.8 Electrical installation
2.8.1 Cable routing
Observe the following when routing the cables:
• Use suitable cables to connect power supply and communication.
• Route power cables and signal cables in separate cable ducts.
• Maintain the greatest possible distance between power cables and signal cables.
• Avoid using long cables running parallel to one another.
2.8.2 Interface box connections
[4]
[3]
[2]
[1]
45035998228608907
[1] Covers of the screw fitting holes (M25×1.5)
1)
[2] Covers of the screw fitting holes (M32×1.5)
1)
[3] Terminal strip, power input
[4] Connection to MOVIPRO
®
(Han
®
10B, female)
1) The screw fittings are not included in the scope of delivery.
23106913/EN – 02/2018