SGC SG-2000 - Page 90

SG-2000 MANUAL 83
The SGC Building, 13737 S.E. 26th St. Bellevue, WA. 98005 USA
©1995, SGC, Inc. TEL: (206) 746-6310 FAX: (206) 746-6384
3) Depress the “7” button to disperse.
Control Head Number Display
To display control head number for 2 seconds (will be timed out after 4 seconds):
1) Press the “SHIFT/FUNC” button.
2) Press the “0” or “MODE” button.
Back Light
To turn back light on or off or adjust brightness level:
1) Press the “SHIFT/FUNC” button.
2) Press the “CHAN” button.
3) Press “Up” or “Down” arrows to step through available levels.
Noise Blanker
To turn noise blanker on or off (optional):
1) Press the “SHIFT/FUNC” button.
2) Press the “4” or “SPK” button.
Beep
To enable a beep for every key stroke:
1) Press the “SHIFT/FUNC” button.
2) Press the “5” or “TIMER” button.
Display (Date / Time)
To toggle between constant date/time display or to alternate date/time
display:
1) Press the “SHIFT/FUNC” button.
2) Press the “6” or “CLOCK/DATE” button.
Delete
To delete last entry made:
1) While in programming mode, press the “SHIFT/FUNC” button.
2) Press the “7” or “INTCM/XCV” button.