13 1-800-798-7398
USING YOUR SHARK ION ROBOT™ - continued
SETTING YOUR CLEANING SCHEDULE ON THE REMOTE
1 To schedule a cleaning, the day and time must be set.
If you haven’t yet set the date and time, follow the steps
on page 12.
2 To schedule or edit a cleaning, press and hold the
SCHEDULE button (with the calendar icon) on the remote
control for one second. On the screen, the day of the week
display will flash.
3 Use the UP/DOWN arrows on the remote to select the
day of the week for your scheduled cleaning. (Days with a
cleaning already scheduled will be circled. If a day is not
circled, there is no cleaning scheduled for that day yet.)
Press the CLEAN/ENTER button on the remote to set
the day. The day of the week will remain flashing until the
cleaning time is completely scheduled.
4 Use the UP/DOWN arrows on the remote to turn ON or
OFF the cleaning scheduled for the selected day. Press
CONFIRM/CLEAN to confirm selection.
5 If OFF is selected, the screen will display the days of the
week again, with no time or AM/PM options. If ON is
selected, a circle will appear around the selected day. To
change the time of the cleaning on the selected day, use
the UP/DOWN arrows on the remote to select the hour of
the cleaning, then press CLEAN/ENTER to set.
6 On the screen, the minutes field in the time display will
begin flashing. Use the UP/DOWN arrows to select the
minutes, then press the CLEAN/ENTER button to set. On
the screen, AM and PM will begin to flash.
TIP: Whenever you use
the remote control, make
sure you point it directly at
Shark ION ROBOT, and
ensure that Shark ION
ROBOT is powered on.
Dock Spot
Clean
Enter
To Next Page
Loading...
Need help?
General
