19 1-800-798-7398
MAINTAINING YOUR SHARK ION ROBOT™ - cont’d.
CLEANING THE BRUSHROLL
1 Push up on the tabs on the brushroll access door, then lift
off the door.
2 Remove the brushroll.
3 Clean the brushroll with the provided hair removal tool.
4 To reinstall the brushroll, insert the flat end first, then the
protruding end, then click brushroll securely into place.
5 Close the brushroll access door and press down until it
clicks into place.
CAUTION: Turn off power
before performing any
maintenance.
NOTE: When cleaning
brushroll, be sure to not
cut anything other than
hair, string, fibers,
or other debris.
STEP 1
STEP 2 STEP 3
To Next Page
Loading...
