Shark ION ROBOT RV700 Series

8sharkclean.com
ENGLISH
CLEAN BUTTON
To begin cleaning with your Shark ION
ROBOT™, press the CLEAN button. Press
button again to stop.
DOCK BUTTON
Press DOCK button to stop cleaning and
send the unit back to the charging dock.
SPOT BUTTON
For thorough cleaning of an area of
concentrated dust or debris, press the
SPOT button.
“!” ERROR INDICATOR
When a blockage or a filter problem
occurs, the “!” error indicator light will
illuminate. Clear any blockages and clean
filters. Remove dust bin and make sure
nothing is blocking suction. See page 23
for a full list of error codes.
BATTERY CHARGE INDICATOR LIGHTS
The indicator lights display the amount of
charge remaining in the battery. See page
10 for more details.
SCHEDULE INDICATOR
Illuminates when a cleaning time is actively
scheduled.
Clean
!
Spot
Dock
Replace
!
Replace
Clean
Spot
Dock