sharkclean.eu
ENGLISH
1716
USING THE SHARK® ION ROBOT
!
Rengøring
Ladestation Maks.
!
Rengøring
Ladestation Maks.
BotBoundary strips
BotBoundary strips
Cut the BotBoundary strip to the desired length
(45cm minimum) so that it spans the length
of the doorway or object you want to block o.
Identify areas or objects you want the Robot to avoid.
To keep your Robot away from certain areas, such as pet bowls, fragile objects, wires,
or doorways, use the BotBoundary strip to quickly and easily create “no-go zones”.
NOTE: To prevent bumping, place strip at least 5cm in front of the object you want to block o.
Use the BotBoundary strip supplied in the box to
create ‘no-go’ areas. Simply cut the BotBoundary
strip to size and place in front of areas that you want
the Robot to avoid.
BotBoundary Strip
Generally, botboundary strips are not needed
on stairs because your Robot's cli sensors will
prevent it from falling o ledges. For your Robot’s
cli sensors to work properly, all runners, rugs,
or carpets must be at least 20cm from any stairs
(or extend over the edge of the stairs.)
If a runner, rug or carpet edge is less than
20cm from the stairs and can’t be moved,
use a BotBoundary strip to block o the stairs.
USING THE SHARK ROBOTUSING THE SHARK IQ ROBOT
THE SHARKCLEAN APP
CREATE AN ACCOUNT
ADD A ROBOT
DOWNLOAD THE APP
Step 1: Enter your email address.
Step 2: Enter a password.
Step 3: Confirm your email.
Step 4: Sign in to the SharkClean App with your
email and password.
Step 1: Click on the menu button in the SharkClean
App and 'Add a Robot'.
Step 2: Click on 'Get Started'.
Step 3: Switch your Robot into the 'ON' position.
Step 4: Find a good home for your Robot Charging
Dock.
Step 5: Pair your phone to the Shark® ION Robot by
pressing the left and right buttons on your
Shark® ION Robot.
Step 6: Select 'SharkXXXXXXXXXXX' in your
WI-FI settings, and then return to the
SharkClean App.
Step 7: Select your WI-FI network and enter your
WI-FI password.
Step 8: Wait 1-2 mins for your Shark® ION Robot to
connect to WI-FI.
Step 9: Start cleaning!
WI-FI TROUBLESHOOTING
• The App will only work on a 2.4GHz network.
• Typical home Wi-Fi networks support both 2.4GHz
and 5GHz.
• Do not use a VPN or a proxy server.
• Make sure Wi-Fi isolation is turned o on the
router.
• For technical support please visit sharkclean.eu
To use the App, your phone must be connected to a 2.4GHz network.
ERROR CODE PROBLEM
! (RED) + Wi-Fi indicator (RED Flashing) Wrong password for Wi-Fi
! (Flashing red) + Wi-Fi (RED) SSID cannot be found, try connecting again
! + Wi-Fi (Flashing RED alternately) Wrong user name or password for your Shark account
! + Wi-Fi (Flashing RED at the same time) Cannot connect to Wi-Fi
Download the SharkClean App using an Android or IOS smartphone,
sharkclean.eu
To Next Page
Loading...
Need help?
General
